Back to tenders & grants page

The Supply, Delivery and Installation of Machining and Robot Cells

The Supply, Delivery and Installation of Machining and Robot Cells has been closed on 25 Feb 2022. It no longer accepts any bids. For further information, you can contact the University of Strathclyde

Bellow, you can find more information about this project: 

General information
Donor:
University of Strathclyde
Industry:
Machinery & Equipment
Manufacturing
Status:
Closed
Value:
128000
Timeline
Published:
11 Feb 2022
Deadline:
25 Feb 2022
Contacts
Name:
Natasha Murray
Phone:
+44 1415484451
+44 1414298888
Email:
Not available
Description
https://www.publiccontractsscotland.gov.uk/search/show/search_view.aspx?ID=FEB440558

Contract Notice (below OJEU threshold)

Section I: Contracting authority

I.1) Name and addresses

University of Strathclyde

40 George Street, Procurement Department

Glasgow

G1 1QE

UK

Contact person: Natasha Murray

Telephone: +44 1415484451

E-mail: natasha.murray@strath.ac.uk

NUTS: UKM82

Internet address(es)

Main address: http://www.strath.ac.uk/

Address of the buyer profile: https://www.publiccontractsscotland.gov.uk/search/Search_AuthProfile.aspx?ID=AA00113

I.2) Joint procurement

The contract is awarded by a central purchasing body

I.3) Communication

The procurement documents are available for unrestricted and full direct access, free of charge at:

https://www.publictendersscotland.publiccontractsscotland.gov.uk/esop/pts-host/public/pts/web/login.html


Additional information can be obtained from the abovementioned address


Tenders or requests to participate must be sent electronically to:

https://www.publictendersscotland.publiccontractsscotland.gov.uk/esop/pts-host/public/pts/web/login.html


Electronic communication requires the use of tools and devices that are not generally available. Unrestricted and full direct access to these tools and devices is possible, free of charge, at:

www.publictendersscotland.publiccontractsscotland.gov.uk


I.4) Type of the contracting authority

Body governed by public law

I.5) Main activity

Education

Section II: Object

II.1) Scope of the procurement

II.1.1) Title

The Supply, Delivery and Installation of Machining and Robot Cells

Reference number: UOS-22754-2022

II.1.2) Main CPV code

42000000

 

II.1.3) Type of contract

Supplies

II.1.4) Short description

The University of Strathclyde requires a suitably qualified supplier to supply, deliver, install and commission a large industrial robot and machining cell on site at the National Manufacturing Institute of Scotland (NMIS).

II.1.5) Estimated total value

Value excluding VAT: 128 000.00  GBP

II.1.6) Information about lots

This contract is divided into lots: No

II.2) Description

II.2.2) Additional CPV code(s)

42900000

51430000

51500000

II.2.3) Place of performance

NUTS code:

UKM82


Main site or place of performance:

National Manufacturing Institute of Scotland

II.2.4) Description of the procurement

Industrial automation is an ever-growing sector, and one which the National Manufacturing Institute of Scotland (NMIS) is actively involved in. In order to develop on the theme of automation within the machining sector, NMIS require a robotic machining cell and a large industrial robot cell. NMIS envision the purchase of the equipment will expand the institution's capabilities and ensure the delivery of projects which require a degree of flexibility when machining more complex geometries in relation to the machining cell, and give general flexibility when in relation to the large industrial robot cell.

NMIS require a single suitably qualified supplier supply, deliver, install and commission the equipment in line with the below non-exhaustive specification list:

- The offered robot machining cell must include a robot which has a maximum rated payload capacity 10kg.

- The offered robot machining cell must include a teach pendant for robot control.

- The footprint of the enclosed robot machining cell must not exceed 1650 x 1500 x 1900 (W x D x H) mm.

The equipment must have a reach of at least 3 m.

- The offered industrial robot cell must have a rated payload capacity of between 120 kg and 150 kg

-The offered industrial robot cell must be able to support 120 kg at least 300 mm away from the equipment flange, in all three principle orthoganal directions.

- The offered industrial robot cell's controller must facilitate communication via EtherCAT.

II.2.5) Award criteria

Criteria below:

Quality criterion: Quality / Weighting: 60

Cost criterion: Cost / Weighting: 40

II.2.6) Estimated value

Value excluding VAT: 128 000.00  GBP

II.2.7) Duration of the contract, framework agreement or dynamic purchasing system

Duration in months: 33

This contract is subject to renewal: No

II.2.9) Information about the limits on the number of candidates to be invited

II.2.10) Information about variants

Variants will be accepted: No

II.2.11) Information about options

Options: Yes

Description of options:

The Contracting Authority reserves the right to request additional deliveries by the successful Tenderer, either intended as partial replacement of supplies or installations or as extensions of existing supplies and installations.

The Contracting Authority may at it's sole discretion exercise this option.

II.2.13) Information about European Union funds

The procurement is related to a project and/or programme financed by European Union funds: No

Section III: Legal, economic, financial and technical information

III.1) Conditions for participation

III.1.2) Economic and financial standing

List and brief description of selection criteria:

4B.1.2 Bidders will be required to have an average yearly turnover of a minimum of 256,000.00 GBP for the last 3 years.

4B.5.1a - 4B.5.3 Insurances

It is a requirement of this contract that bidders hold, or can commit to obtain prior to the commencement of any subsequently awarded:

contract, the types and levels of insurance indicated below:

Employer’s (Compulsory) Liability Insurance = 10m GBP

Public and Product Liability Insurance = 10m GBP

Professional Risk Indemnity Insurance = NOT USED

In respect of any one incident and unlimited as to number of claims, and adequate insurances covering all the Contractor's other liabilities in terms of the Contract.


III.1.3) Technical and professional ability

List and brief description of selection criteria:

4.C 1.2. Bidders will be required to provide examples that demonstrate that they have the relevant experience to deliver the supplies as described in part II.2.4 of the Find a Tender Service Contract Notice or the relevant section of the Site Notice.

Please provide a minimum of three (3) examples of experience of supply and delivery of the equipment as detailed within the specification over the last three (3) years.


III.2) Conditions related to the contract

Section IV: Procedure

IV.1) Description

IV.1.1) Type of procedure

Open procedure

IV.1.8) Information about Government Procurement Agreement (GPA)

The procurement is covered by the Government Procurement Agreement: Yes

IV.2) Administrative information

IV.2.2) Time limit for receipt of tenders or requests to participate

Date: 25/02/2022

Local time: 12:00

IV.2.4) Languages in which tenders or requests to participate may be submitted

EN

IV.2.6) Minimum time frame during which the tenderer must maintain the tender

Duration in months: 3 (from the date stated for receipt of tender)

IV.2.7) Conditions for opening of tenders

Date: 25/02/2022

Local time: 12:00

Section VI: Complementary information

VI.1) Information about recurrence

This is a recurrent procurement: No

VI.2) Information about electronic workflows

Electronic ordering will be used

Electronic invoicing will be accepted

Electronic payment will be used

VI.3) Additional information

The buyer is using PCS-Tender to conduct this ITT exercise. The Project code is 20684. For more information see: http://www.publiccontractsscotland.gov.uk/info/InfoCentre.aspx?ID=2343

(SC Ref:683176)

VI.4) Procedures for review

VI.4.1) Review body

Glasgow Sheriff Court

1 Carlton Pl

Glasgow

G5 9DA

UK

Telephone: +44 1414298888

VI.5) Date of dispatch of this notice

11/02/2022


Featured tenders

Get free access to our Tenders & Grants Database

Our service is free of charge and will always be

Join Now